Dynon
Certified, Affordable Glass cockpit technology
Dynons HDX EFIS system is now certified for over 600 aircraft. Along with synthetic vision and Terrain mapping, it can also display all engine monitoring parameters; control an autopilot; control remote Com radios/transponder; it can also integrate with a certified Nav/Com radio or GPS Navigation system to be a full IFR panel solution. A Dynon EFIS system will save you money compared to alternative glass panel solutions both in equipment cost as well as installation labor, due to the innovative Dynon Network integration.
Screen size for any panel
Both the 7" and 10" HDX displays are certified, giving you the best option for your available panel space.
Remove weight and save space
The HDX System allows for the complete removal of all traditional round gauges- including flight, navigation and engine instrumentation. The installation of Dynons D10 as a certified backup instrument is required as part of the STC. This reduces overall weight and simplifies the instrument panel.
Industry-Leading features
- Clear, Vibrant Displays: SkyView HDX features bright, high-resolution HD displays with wide viewing angles for the sharpest picture ever from Dynon.
- Beautiful Design: SkyView HDX’s modern, elegant design features robust metal and glass construction that is worthy of your aircraft.
- Unrivaled Control Ergonomics: SkyView HDX combines full physical controls with a touchscreen, allowing unrivaled control and performance in all flight conditions - especially turbulence.
- Touch Interface: SkyView HDX features icon-driven touch controls and simplified screen navigation for reduced workload. An expansive glass display features edge-to-edge touchability with no bezel in the way.
- Capable and Compatible: SkyView HDX uses Dynon’s remote SkyView Network modules and components to allow clean, elegant panel layouts. SkyView HDX features seamless compatibility with today’s best IFR navigators like the Avidyne IFD series.
Certified and Affordable Autopilot solution
The full suite of Dynon Certified avionics products is now approved in nearly 600 single-engine type certificated airplane models. Autopilot approvals are currently available for Cessna 172 F-S models and the Beechcraft Bonanza P35, S35, V35, V35A, and V35B. Dynon is obtaining additional approvals for more autopilot installations continuously, with approvals for additional aircraft currently in progress. Dynon publishes a schedule of upcoming approvals that it expects to obtain in the coming months. Pricing for the certified versions of approved Dynon products is the same as existing experimental/light sport customers. The STC for all approved aircraft is priced at $2,000
Avidyne
We love Avidyne IFD Navigators! They have a high resolution touch-screen as well as dedicated knobs and pushbuttons, giving you the choice of how you want to interact with the unit- unlike other systems that are touch-screen only.
For anyone familiar with the Reno-Tahoe area, turbulence is a daily occurrence and having these quick-access dedicated buttons and push-knobs are a blessing in true hard IFR conditions! Cost effective upgrade The Avidyne IFD series navigators offer much more as standard-including WiFi and Bluetooth connectivity. Through Avidyne's IFD100 app for iPad, you are able to control everything on the Navigator including flight plans, com/nav frequencies, view map overlays and synthetic vision. The IFD440 and IFD540 are pin and tray compatible with the GNS430W/530W navigator predecessors, saving you thousands on installation labor- re-wiring to the GNS430W successor can be up to a 45 hour job, whereas the Avidyne could simply slide into place.
The IFD440,540 and 550 can be configured to control a remote ADSB out transponder. Your squak codes can be set in a variety of ways- either through the touchscreen, push-knobs, through the IFD100 iPad app or even via Avidyne's Bluetooth keyboard! If you prefer a dedicated panel-mount transponder, the AXP340 ADSB Out transponder is a great companion to your radio stack. ADSB IN Traffic and Weather can also be displayed on any of the IFD screens via the Avidyne Skytrax100b ADSB Receiver Working in Harmony Some pilots prefer to have dual GPS/Nav/Com Navigators in their stack to provide redundancy. There are several benefits to having dual IFD Navigators which start with the Avidyne database architecture- A high speed datalink between both units ensures that all information is seamlessly available. When entering information into the top IFD unit, the lower one will automatically become a full-screen QWERTY keyboard- making it much quicker and easier to input a new waypoint or other information. Advanced Features The top of the line IFD550 has a built-in certified AHRS system, giving you further piece of mind when in IMC conditions- it can be displayed on the screen of the IFD550 as 3D synthetic AHRS or on your iPad via the IFD100 app to give you an 'out of the window' synthetic vision display Competitive Pricing An Avidyne IFD GPS Navigator can be more affordable and cost effective than you think, especially compared to other Navigator options. Please give us a call or email by clicking at the bottom of the page to get a bespoke quote for your aircraft
BendixKing
Aeroview Touch
The AeroVue Touch is a full-function PFD/MFD solution for replacement of outdated, legacy six-pack instruments. It has been specifically designed for Part 23 class I, and II certified aircraft. It has been certified for hundreds of aircraft and models. The highest-quality materials have been incorporated into the design by BendixKing/Honeywell experts, drawing from programs such as the F-16 avionics. Years of extensive in-lab and flight tests have been conducted to ensure superior quality, reliability and safety.
High Resolution Display
A bright, 1920 X 1200 (near 4K) WUXGA high resolution 10.1" touchscreen display. Multi-function display includes dynamic moving maps giving you the ability to view terrain features, airspace boundaries, airports, flight plan routings and navigational aid. The MFD offers VFR, in addition to IFR, setting it apart from other leading vendors. Lastly, charts, ADS-B In traffic and weather.
EFIS Flexibility
Each display system operates independently from the others, while backing up each other. Each can be used independently to fly the aircraft, providing up to triple-redundancy. In the rare event that one display fails, all the data and operations continue to be available in the backup display. PFDs can be used as a full screen PFD or a split screen primary and multifunction display. Since the MFD can operate as a full-size backup display which provides ADI, HSI, HDG, SVS, NAV/COM and A/P modes. It is much easier to navigate with a full-size backup display instead of a small 3” backup attitude indicator.
Autopilot Integration
Ability to integrate the system to select KFC and S-tec Legacy autopilot systems such as the KFC150. It can also integrate with BendixKings new Aerocruze 230 autopilot. The Aerocruze 200 autopilot is a highly advanced 3 axis capable touch-screen autopilot, designed to be a direct replacement for legacy KFC150 systems using the existing servos.
Modern Features Included
The Aeroview Touch includes WiFi as standard and USB-C. Flight plans can be wirelessly transferred between the display and a tablet.
IFR Capable
When combined with an IFR certified GPS Navigator the Aeroview Touch system is fully IFR capable. BendixKing sell the AeroNav Navigators- a slide in replacement for the Garmin GNS530/430
A Digital Autopilot for the modern age
The Aerocruze 100 Autopilot system can be operated independently or in conjunction with select EFIS systems and Electronic Flight Displays to give you full GPS steering via your preferred GPS navigation system STC for Certified Aircraft The Aerocruze 100 Autopilot is currently certified for the following aircraft Cessna 172, 175, 177, 180, 182, & 185 Piper PA-28 & PA-32
Future STC Expansion TruTrak flight systems was recently taken over by Bendix King (A Honeywell company) and with this new might we hope will come a swift and far reaching STC expansion! Stay tuned for further updates
Highlighted Features
- Bank Angle Select (if no GPS signal)
- Track Select GPS Nav (point to point type flight plans)
- GPSS (roll steering commands)
- Vertical Speed
- Select Altitude Hold Altitude
- Select Altitude Pre-Select GPSV (LPV Approaches)
Vertical Speed Select Altitude Hold Altitude Select Altitude Pre-Select GPSV (LPV Approaches) Control Wheel Steering Emergency Level AEP (Bank Angle Protection Mode) Roll Servo Pitch Servo Install Kit Wiring Harness Come and try out the AeroCruze 100 Autopilot! At Advanced Aviation Reno, we currently have two aircraft fitted with these autopilot systems! We can easily give you a quick demo or even a test flight to show you how smoothly and efficiently they control the aircraft!
Trio Avionics
The Pro Pilot is a two axis autopilot designed for precise navigation and altitude control. It encompasses all of the performance and safety features of our other systems, and makes them available in a single, panel mounted instrument. The system includes back-lighted buttons and illuminated face plate nomenclature as part of a pleasing new industrial design.
The Pro Pilot provides excellent horizontal navigation capabilities and the vertical navigation provides altitude control, climb/descent functions with airspeed limiting, and altitude pre-select. Climb/descent on airspeed is also included.
The Pro Pilot uses Trio's proven "intelligent" Gold Standard servos to assure safe and reliable control actuation.
While the Pro Pilot incorporates many features, it is very simple to operate. Just press the H NAV button and it will track your flight plan. Press the V NAV button and it will hold your current altitude.
The Pro Pilot is available in two models - instrument mount and rack mount. Both models feature backlit nomenclature and bright LED indicators
Currently certified for: Cessna 172/182/175/177/180/190; Piper PA-28, Pa-32; Grumman AA-5 (A/B) - Coming soon for Piper Commanche and Socatia TB Aircraft!
Learn more about Trio Autopilots here: https://www.thestcgroupllc.com/pages/pro-pilot-autopilot-by-trio-avionics
Insight Avionics
Insight Avionics offer great Engine Monitoring devices for whatever aircraft you fly. These can be a clean install or if you have an older GEM monitor, then we can do an upgrade kit which utilizes the existing CHT/EGT probes and wiring. Items like Fuel Flow, TIT and OAT can also be added on. Engine trend data can also be downloaded via an SD card for trend monitoring over time. There are many other useful features including a probe diagnostic system for identifying an open probe wire; lean assist as well as vibration trending with additional equipment. Please contact for more information
JPI Instruments
Engine monitoring solution for any aircraft If you want to replace your primary engine instruments or just want a reliable electronic backup, we will have a solution for you! Already installed in thousands of aircraft, a JPI Engine Monitoring System is a great investment Single Engine and Twin JPI have a wide range of single engine engine monitors for any budget. The EDM960 for Twin engine aircraft is now certified too- allowing you to remove all your factory primary gauges and simplify your panel with one display screen. Enhanced reliability and safety Modern technology means modern reliability, a JPI monitoring system will allow you to have confidence in your engine temperature and pressure readings. All the JPI monitors have remote sensors- so no more will you have fuel lines or oil lines running to the back of your panel!
Trig Avionics
High quality avionics
Designed and built in Edinburgh, Scotland, Trig Avionics' products are built to last.
Solutions for any aircraft type
Whether you have a glider, single-seat homebuilt or a fully certified aircraft- Trig has a VHF Radio and Transponder solution for you. Their product line includes Audio Panels, Panel mount and compact VHF Radios, Panel Mount and compact Transponders, standalone GPS Receiver solutions for ADSB compliance, as well as their upcoming, highly anticipated, Nav/Com radio
Highlighted Features
All of Trigs VHF Radios are capable of monitoring your standby frequency while listening to your active- handy for picking up ATIS or ground when getting ready for departure. Their radios also include a built-in intercom system! Their panel mount radios also include their 'replay' feature where the radio will replay the last transmission- great for if you missed part of your clearance!
The panel-mount audio panel is available in two models- the TMA44/TMA45. The TMA45 has a 6 place intercom system, Trigs Digital Noise Reduction and built in Bluetooth connectivity.
The Compact radio and transponder solutions are great for those with a smaller instrument panel or those with no electrical system in their aircraft as the current draw of these units is very minimal!
Fast and Affordable ADSB Compliance
If you have a WAAS GPS Navigator in your aircraft and a King KT76 Transponder, we can make you ADSB Out compliant in an afternoon! Trigs TT31 Transponder is pin and tray compatible with the legacy KT76, there is just one wire that needs to be ran from a WAAS GPS source to the transponder. This saves many hours of installation time!
If you don't have a WAAS GPS Navigator, we can install one of Trigs standalone GPS receivers and WAAS Antenna (TN70 for certified aircraft, TN72 for experimental and LSA) - these are small and remote that can be fitted anywhere in the aircraft.
TX56/57 Nav/Com
The highly anticipated TX56 Nav/Com is due for release sometime in the near future. A great modern replacement for an SL30 or older Nav/Com with a low profile design and digital outputs, it is a great companion to an EFIS display or in conjunction with Trigs TI106 CDI.
uAvionix
The uAvionix SkyBeacon is a simple 2020 ADSB Out compliant solution. It works with your existing Mode C or Mode S Transponder and simply adds in the WAAS GPS signal from its inbuilt GPS receiver. The unit also includes built-in Nav and Strobe lights and can be installed/configured in as little as a few hours.
Tailbeacon works similarly to the SkyBeacon except it mounts as a replacement tail nav position light- currently STC'd for Cessna 172 models Modern
Digital Attitude Indicators uAvionix recently acquired the Aerovonics company and so are able to offer brilliant new digital, solid state Attitude Indicators. The AV-20-s and AV-30 Instruments will provide a reliable backup AI with features such as AOA stall warning, TAS displays and a digital CDI/HSI Display (AV-30 only) as well as many others AV-20-S Displaying on its glare-free 2" diameter screen, the AV-20-S provides a multitude of useful features. FAA Certified under the NORSEE approval.
Custom Panels
We are able to create incredible new custom Instrument Panel Overlays for your aircraft. These are mostly required for new avionics installs such as Dynon or the BendixKing Aeroview.
We have the capability to do all the required CAD design in-house and then we work with top quality local vendors to produce Lexan test panels; CNC or Waterjet cutting of aircraft-grade Aluminium; Power coating and Silkscreening services.
Unlike others, our Instrument Panels are flat-rated to include engineering, installation and powder-coating.
Please get in touch for a quote
